Efco DS2410 T Petrol Brushcutter

Take an aggressive approach to the clearance of well-established scrub and bramble with the powerful but lightweight and easy-handling Efco DS2410 T Petrol Brushcutter.

It’s equipped with a high-performance 1.1hp (21.7cc) Emak two-stroke power-unit which, thanks to its forged-steel con-rod; two-ring piston; and nickel-plated cylinder lining, will prove exceptionally reliable in the face of heavy-duty commercial use.

An integrated choke-lever works with a fuel-primer to ensure you’ll have no starting-issues; while an electronically-controlled digital coil delivers consistently uniform combustion, in turn optimising power-output across the RPM-band.

So as to facilitate the comfortable completion of time-consuming brushcutting and grass-trimming applications, Efco have furnished the DS2410T with an ergonomic ‘U’-type handlebar and superior anti-vibration measures (its low-weight design (5.2kg) contributes further to ease-of-handling).

The Efco DS2410T Petrol Brushcutter is supplied with a 130mm-diameter line-head, which incorporates the Italian manufacturer’s Load & Go technology that makes it possible to fit a new spool in just 20-seconds.

A bump-feed mechanism means you can spool-out fresh cord by simply tapping the cutter-head on the ground; while Efco’s provision of a large-diameter (6mm) steel drive-shaft means the maximum amount of power and torque will reach the cutter-head.

Efco’s Burn Right engine technology ensures this model complies with Euro 2 emission legislation.

• A premium home-use brushcutter with numerous commercial-duty features
• High-spec engine with a digital coil for optimum combustion and linear torque response
• Half-throttle choke position and fuel-primer for headache-free starts
• 0.4-litre transparent fuel-tank means you can check the fill level at a glance
• Burn Right technology delivers Euro 2 emission compliance
• The lightest brushcutter in its class – just 5.2kg
• Ergonomic ‘bike’-type handle confers superior manoeuvrability
• Solid-steel drive-shaft and bevel gearing ensures optimum power-transfer
• Cutter-head spool can be changed in just 20 seconds
• Bump-feed mechanism for rapid line-feed with minimal interruption to your work